The cement rotary kiln maintenance is the least cost and shortest cycle to extend the rotary kiln service life. Early detection and handling of sudden failure, the timely elimination of equipment performance, resulting in quality problems, to ensure the normal operation of the device safely. Below, Xiaobian to tell you about the Xinxiang Great Wall cement kiln equipment maintenance methods.

The normal operation of the rotary kiln has a great relationship with the adjustment of the roller. When the rotary kiln is installed, the axle axis is parallel to the center line of the kiln. If the lead wire is placed in the meshing of the belt and the roller, Out of the lead wire are equal width of the rectangular strip.

Lubrication and cooling

1) Lubricants and greases should be used as specified, if the use of substitutes can only use a larger viscosity of the oil to replace the smaller viscosity.

2) the new rotary kiln continuous operation of 100 to 150 hours, need to replace all the lubricants and grease once, after every 6 months for a cycle to replace the new oil.

3) found that oil spills should take measures, do not allow oil leakage to the foundation.

4) The surface of the roller is cooled by water.

Operation ways

The various parts of the transmission system and the wheel must always be checked and found to have noise, vibration and fever and other abnormal conditions should be promptly handled. Check the wheel and the wheel between the contact and wear is uniform, with or without excessive force and facet and Ma surface, etc., according to the wheel and the plate in a rotation between the relative displacement to determine the gap and wear, Pad cracks and other cracks.