Home > PRODUCTS > Grinding Equipment > Slag Mill

Slag Mill

Slag Mill is widely used in various manufacture industries, like cement, silicate, new building material, dry and wet grinding for all kinds of ores and other materials.

Application : Cement Plant, Clinker Grinding Unit, Quicklime Plant
Capacity : 11-78 t/h
Power consumption : 50~80 kWh/t
Motor Power : 95-4500 kW
Fineness : 3800-4000 cm²/g

vip@chaeng.co

8615290747879

Get solution and support:

Low invest cost,return on investment is high,stable quality,reliable performance
Easy to operate, convenient to maintain
High drying ability,environmental protection
Improving the quality of final product effectively.
With more than 40-year experience on slag mill manufacture, we have strong technical strength.
Operator friendly - the mill operates smooth and steady
Reduces energy consumption which significantly increases energy efficiency of grinding

Product Profile

Slag mill is a kind of equipment used to grind the slag into powder particles. The technical that uses the tube mill on the production of slag has been very mature. The slag produced can be used as concrete admixture, reducing the project costs significantly and enhanced the compressive strength, tensile strength, shear strength and bending strength of the concrete.The optimal performance of ball mills (slag ball mill) is the key to a successful plant operation.

Process flow

The energy saving ball mill is a horizontal cylindrical rotating device, which has two cabins. It is energy saving grate ball mill and the outside runs along the gear. The materials enter the first cabin of the mill spirally and evenly through the feeding apparatus and hollow shaft. In the first cabin, there is stepped liner or corrugated liner, and steel balls with different specifications. The centrifugal force generating from the rotation of the cylinder brings steel balls to a certain height, and then the balls fall, thumping and grinding the materials. After coarse grinding in the first cabin, the materials enter the second cabin by single-wall partition. There is flat liner and steel balls in the second cabin, where the materials are grinded further. Finally, the powder is discharged through discharge grate and the grinding operation is finished.

Product structure

The ball mill mainly consists of feeding part, discharging part, rotary part, drive (reducer, small driving gear, motor, electronic control) etc. The hollow shaft adopts steel castings and the lining can be replaced. The rotary gear is processed with casting hobbing. There is wear-resistant liner in the cylinder and have strong wear resistance. The machine runs stably and has reliable performance.

ball mill structure01_4.jpg

Specifications

Model (m)	Cylinder Diameter (mm)	Cylinder Length (mm)	Effective Volume (m³)	Rotate Speed (r/min)	Grinding Media Weight (t)	Motor (kW)	Weigth (t)
MQY15×30	1500	3000	5	26.6	9	95	18.5
MQY15×36	1500	3600	5.7	26.6	10.6	95	17.22
MQY21×30	2100	3000	9.4	22	15	200	45
MQY24×30	2400	3000	12.2	21	22.5	250	55
MQY24×60	2400	6000	22.8	20.7	43	400	65
MQY27×36	2700	3600	18.5	20.5	39	400	61.34
MQY27×45	2700	4500	23.5	20.5	43.5	500	76
MQY28×80	2800	8000	43	20	78.6	800	115
MQY32×36	3200	3600	26.3	18.3	48.4	500	116.94
MQY32×45	3200	4500	32.9	18.3	60.5	630	124.23
MQY32×75	3200	7500	55.5	18.3	102	1250	154
MQY34×45	3400	4500	37	18.4	74.6	800	129.8
MQY34×56	3400	5600	45.8	17.9	84.3	1120
MQY36×50	3600	5000	46.7	17.5	85.96	1250	150
MQY36×60	3600	6000	54	17.3	102	1250	162.7
MQY36×85	3600	8500	79	17.4	131	1800	235
MQY36×90	3600	9000	83.5	17.4	138	1800	286
MQY40×60	4000	6000	69.8	16	126	1500	203.5
MQY40×135	4000	13500	155	16	233	3300	343
MQY43×61	4270	6100	80	15.67	144	1750	215.3
MQY50×64	5030	6408	120	14.4	251	2600	318.5
MQY55×65	5500	6500	143.3	13.8	264	3400	451.5
MQY55×85	5500	8500	187.4	13.8	335	4500

GGBS ball mill is a key machine mainly used to process materials from crushing process, and it is widely used in various industries, like cement plant, clinker grinding unit, GGBS Plant.

Pre-sales Service:

The wide product range enables us to provide our customers with stand-alone machines or complete processing plants. Based on our customers’ request and budget, our experts make efficient, reliable solutions. Following customers’ order we produce strictly, what’s more, before placing the order every customer has the chance to visit XinXiang Great Wall (Chaeng) working machines or complete plant in the site.

To ease the trip for every visitor to China, in particular the first-time visitor, we provide FOR FREE all relevant visitor-friendly services including invitation letter preparation, hotel reservation, airport pick-up, incity transportation, and sightseeing guide, etc.

[s]HTB18139IpXXXXa3aXXXq6xXFXXXS.jpg

After-sales Service:

Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customers’ plants. Necessary training about machine daily maintenance to local workers is provided also.

After-Sales department is made of well-trained employees and installation engineers, the installation engineers are special and professional members of XinXiang Great Wall (Chaeng), they are now strategically located home and abroad, working for our customers.

Related Products: